PRODUCTS

1. 1 coat of Adherglass (DFT 15 μm) or
   1 coat of Ticoprene(DFT 60 μm) and
   1 coat of Gelprime (DFT 45 μm)
2. 2 coats of Easylac (DFT 40 μm) or
   2 coats of Unigloss (DFT 40 μm)*
   *add Antiskid Powder or Antiskid Powder CF for the deck
3. 1 coat of Adherglass (DFT 15 μm) or
   1 coat of Ticoprene (DFT 60 μm)
4. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

1. 2 coats of Aquastop (DFT 200 μm)
   Wait a minimum of 48 hours (maximum 72) at 20°C
   Before applying primer, sand with fine grade abrasive paper
2. 1 coat of Adherglass (DFT 15 μm) or
   1 coat of Adherpox (DFT 60 μm)
3. 2 coats of Antifouling paint (DFT 50 μm)

The indicated thickness refers to a single coat.

1. 1 coat of Aquastop (DFT 200 μm)
2. After 16 hours fill with Epomast Evo. For any spot repairs use Epomast
   Sand the surface before continuing with subsequent coats
3. 2 coats of Aquastop (DFT 200 μm)
   Wait a minimum of 48 hours (maximum 72) at 20°C.
   Before applying primer, sand with fine grade abrasive paper
4. 1 coat of Adherglass (DFT 15 μm). Continue after 3-12 hours at 20°C or
   1 coat of Adherpox (DFT 60 μm). Continue after 10 hours at 20°C
5. 2 coats of Antifouling paint (DFT 50 μm)

WE RECOMMEND: launching the boat a minimum of seven days after application of the final coat of Aquastop.

ATTENTION: if the maximum recoating times are exceeded, always sand before continuing with the coating system.

The indicated thickness refers to a single coat.